A–Z reference
Resin printing glossary: 38 terms from ACF to Z-axis
Plain-English definitions for MSLA resin printer hardware, slicer settings, materials, safety and post-processing.

A
ACF
Advanced Composite Film, a release-film type used in some resin vats. Phrozen associates it with reduced suction force in its supported systems. Use only the type and orientation approved for the printer.
Anti-aliasing
A slicer technique that adjusts edge pixels to soften visible stepping. It can improve some contours but can also soften very small details.
B
Bottom exposure
The longer exposure applied to the first layers so the print bonds to the build plate. Use the resin maker's printer-specific profile.
Build volume
The maximum published X, Y and Z envelope in which a machine can form a model. It is not the same as the printer's external size.
C
Cure
Polymerisation caused by suitable light. Printing partially cures each layer; post-curing follows washing and drying according to the resin instructions.
COSHH
The UK workplace Control of Substances Hazardous to Health framework. HSE guidance explains assessing exposure and controlling it at source.
D
Drain hole
An opening added to a hollow model so liquid resin and wash fluid can leave. It must exist at a useful point in the layer sequence.
DLP
Digital Light Processing, which projects layer images with a projector system rather than masking a broad source with an LCD.
E
Exposure time
How long the light engine illuminates a normal layer. The correct starting value depends on printer, resin, colour, layer height and temperature.
F
FEP
A transparent fluoropolymer release film used as the bottom of many resin vats. It is a consumable and needs inspection for punctures, creases and damage.
G
Green part
A printed object before final post-cure. It may still carry liquid resin and should remain inside the controlled process zone.
H
Hollowing
Creating an internal cavity to reduce material. Hollowing also creates internal surfaces, drainage and cleaning requirements.
I
IPA
Isopropyl alcohol, a flammable solvent specified for cleaning some resins. Resin-contaminated IPA should not be poured into drains.
Island
Pixels that begin curing without a sufficiently strong connection to the build plate or previously supported structure.
J
Jig
A tool that positions or guides another part. Ordinary hobby resin is not automatically suitable for load, heat, food, medical or prolonged skin-contact use.
K
“K” resolution
A shorthand for LCD pixel count, such as 9K or 14K. Compare pixel pitch and build area rather than treating the label as print quality.
L
Layer height
The vertical spacing between sliced layers. Smaller layers increase layer count and do not automatically improve every visible detail.
Lift distance
The plate movement used to separate a new layer from the film and allow resin to refill beneath it on a lift-based printer.
M
Monochrome LCD
The masking screen used by current MSLA printers. It transmits the printing wavelength efficiently but remains a replaceable component.
MSLA
Masked stereolithography: an LCD masks a light source so a complete two-dimensional layer cures at once.
N
nFEP
A market name commonly used for PFA release film. Follow the printer maker's material name, size and installation instructions.
Normal exposure
The exposure for ordinary model layers after the initial bottom layers.
O
Overexposure
More curing light than the process needs, potentially enlarging features, closing holes and making supports difficult to remove.
P
PFA
A fluoropolymer release-film material often marketed as nFEP.
Pixel pitch
The physical projected size of an LCD pixel on the build plane, usually stated in micrometres for X and Y.
Post-cure
The controlled UV treatment after washing and complete drying, using the resin maker's wavelength and duration guidance.
Q
Quick-release raft
A raft edge or profile intended to give a tool a controlled starting point. It does not remove the need to cut away from hands.
R
Raft
The cured base that joins supports to the build plate.
Release film
The transparent vat bottom—FEP, PFA/nFEP or ACF—from which each new layer separates.
S
Safety data sheet (SDS)
The supplier document describing hazards, exposure controls, first aid, storage and disposal for a chemical product.
Sensitisation
Development of an allergic response after exposure. Some uncured photopolymer resin SDSs carry the H317 allergic-skin-reaction statement.
Slicer
Software that converts a model into layer masks and motion instructions and can add supports, hollowing and drain holes.
Suction cup
A cavity or geometry that resists separation because it forms a closed or poorly vented volume against the film.
T
Tilt release
A system that tilts the vat to peel a newly cured layer instead of relying only on vertical plate lift.
U
Underexposure
Insufficient cure for the intended layer, potentially causing weak features or separation. Diagnose against the exact maker profile.
V
Vat
The container that holds liquid resin above the light engine and release film.
Vent hole
An opening that admits air to a hollow model, helping liquid exchange and reducing an airlock or suction cup.
W
Water-washable
A resin formulated to use water for cleaning under its instructions. The liquid resin and contaminated water are not therefore skin-safe or drain-safe.
X
XY resolution
The projected pixel dimensions or sampling in the build plane. It should not be read as guaranteed part tolerance.
Y
Yellowing
A colour change that can occur in some clear or pale resins through processing or light exposure. Follow the resin's cure guidance rather than adding UV blindly.
Z
Z-axis
The vertical motion system that positions the build plate. Binding, backlash or repeated defects at one height require manual-guided inspection.
Sources
- Phrozen release-film comparison — accessed 15 November 2026.
- CHITUBOX model editing — accessed 15 November 2026.
- HSE COSHH questions and SDS guidance — accessed 15 November 2026.