Knowledge base

Why do hollow resin prints crack?

By the Resin Printer Guide team · Checked 15 November 2026

Possible causes include trapped uncured resin, retained wash liquid, inadequate drain and vent holes, weak walls and post-cure stress. Treat a leaking or sticky crack as chemical contamination: isolate it, protect skin and eyes and keep it away from living areas.

Review the original slice for sealed cavities and internal islands. CHITUBOX documents hollowing and drain holes, but their position must allow exchange during print, wash and drying. An exterior cure does not prove a sealed interior is safe.

Retain escaped liquid as resin waste and follow local disposal guidance rather than washing it into a sink.

Sources

Related guides