Should I hollow resin miniatures?
Do not hollow a miniature automatically. Small figures may save little resin while gaining internal islands, thin walls, drain holes and a cavity that must be washed, dried and cured safely.
CHITUBOX says hollowing can reduce material and its hole tool allows resin to escape. For a large bust or monster, that can be worthwhile if the wall is structurally adequate and at least a drain and vent path work from the first cup-forming layers. For a small gaming figure, solid printing is often simpler.
Use the slicer's volume figure to compare the saving, then inspect every internal layer before export.
Sources
- CHITUBOX model editing — accessed 15 November 2026.
Related guides
Compare Elegoo Mercury Plus V3.0 and Anycubic Wash & Cure 3 Plus by published washing and curing capacity, then decide whether separate stations suit you better.
Printing and post-processingWashing and curing resin prints without losing control of wasteA step-by-step post-processing workflow for draining, two-stage washing, support removal, drying, UV post-cure and segregating contaminated liquids and solids.
Printing and post-processingResin supports, orientation and hollowing: a layer-by-layer methodOrient resin models by cross-section and visible surfaces, support every island through a load path, and hollow only with drain and vent openings that work during print and wash.